Maintenance & Storage - TRAPP KM 300 Manual De Instrucciones

✔
Wait till the motor reaches the ideal
rotation.
✔
Turn off the motor by releasing safety
lever, remove plug from electrical
socket, and wait until blade comes to a
full stop; so as to enable:
•
to transport or store lawn mower.
•
servicing, clean and inspecting
cutting blade.
•
to remove excess grass from deck
and opening of grass catcher (bag).
•
to remove small object/debris.
After which inspect lawn mower for
damages and repair before turning
on lawn mower.
•
adjustment or replacement of cutting
blade when lawn mower vibrates
excessively.
Attention!
The cutting blade continues to
rotate seconds after lawn mower
has been shut off. Do not put hands
or feet near or inside the lawn
mower deck.
✔
Turn off lawn mower and wait until
cutting blades comes to a full stop
before crossing surfaces without grass,
and before removing grass catcher
(bag).
✔
Never operate lawn mower without
safety features (such as deflector cover
or grass catcher).
✔
When mowing always maintain
electrical cord behind operator.
✔
Keep proper distance to avoid foot
contact with deck.
26
✔
Always remove excess grass from deck,
and clear opening of grass catcher.
✔
Never lift or carry lawn mower while
motor is running.
✔
The cutting blade rotates clockwise.
When lawn mower model MC 50E or
MC 60E - equipped with a three-phase
motor - is started and grass is not being
cut it means that rotation is
counterclockwise. To change to
clockwise rotation, invert the position
between two electric conductors in the
wall outlet or in the plug (consult an
electrician).
Maintenance
& Storage
✔
Always tighten nuts & screws to assure
that lawn mower is in perfect condition
for use.
✔
Inspect electrical extension cord, and
never repair with insulation tape.
✔
For safety measures, replace damaged
and/or worn parts with original TRAPP
parts.
✔
After each use, clean lawn mower by
removing excess grass buildup.
✔
Never spray water to clean the lawn
mower. Use a sponge or a wet cloth
and neutral detergent to clean lawn
mower.
✔
For cutting blade verify the following:
•
only use original TRAPP blade.
•
correct sharpening of blade area for
perfect balance.
•
proper assembly and placement of
cutting blade.