Cutting Blade - TRAPP KM 300 Manual De Instrucciones

✔
Always consult TRAPP service dealers
for maintenance and spare parts.
Service:
Call qualified professionals to service the
equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts
that are not original.
Attention!
Whenever cleaning or servicing, make
sure the equipment is off and the
blades are still as they continue to
move for some seconds.

Cutting Blade

✔
TRAPP cutting blade are temperate to
provide long lasting durability.
✔
Use protective gloves to assemble and
disassemble cutting blade.
✔
Only use original TRAPP blades for
perfect mow/cut blade must always be
sharpened.
✔
When lawn mower demonstrates
excessive vibration, stop immediately
by releasing switch lever, turn off lawn
mower removing plug from electrical
socket and:
✔
Loosen screw.
✔
Remove cutting blade.
✔
Place a round tube over the blade hole,
to check if blade is balanced (pag. 32),
and/or sharpen blade area evenly to
remove to balance blade.
✔
If vibration persist (blade is too worn),
consult TRAPP service dealer to replace
blade.
✔
Re-install blade onto support disc,
respecting cutting direction with motor
direction. Also inspect support disc,
replace if damaged.
Turning Lawn Mower
On and Off
This lawn mower is equipped with a safety
system (to avoid machine turning on
accidentally) which requires the use of
both hands.
To turn on, press red button (1) and
simultaneously grasp safety lever (2)
against handle.
1
Motor only runs when safety lever (2) is
pushed against the handle, and turning
automatically once lever is released.
2
27