Side Rail Exntension For 06/09 Side Rail (Accessories) - wissner-bosserhoff Carisma Manual De Instrucciones

16.7. SIDE RAIL EXTENSION FOR 06/09 SIDE RAIL (ACCESSORIES)
1. Side rail
2. Tilting arm
3. Mushroom
head bolt
4. Clamping lever
Assembly:
1. Pull up the side rails of the nursing home bed to the highest position.
2. Release the clamping lever (Fig. 27, Item 4) by turning it 90° and twisting out the mushroom
head bolt
3. Place the side rail extension onto the side rail of the nursing home bed as shown in
Fig. 28.
Caution! the side safety clearance from the head and foot ends must each be ap-
prox. 6 cm. Rule of thumb: The clearance must be equally distributed at both ends. For
nursing home beds of special length (longer than 2 m) a side rail extension of special
length must be used.
4. Twist in the mushroom head bolt and screw the clamping lever tight (Fig. 27 Item 4) by
turning it 90°
5. Perform a function test of the side rail, including the assembled side rail extension.
(If there are problems with the function, please contact our Customer Service at the
phone number 02377-784-456).
Caution! You must pay special attention when adjusting the side rail. The risk of ent-
rapment of body parts of the resident is especially high during adjustment procedures.
Caution!
ent protection from falling out of the bed.
Fig 23
-
Page 87