Switching on the
appliance
Fig. 2
Press the On/Off button 1.
A warning signal sounds and alarm
button 2 flashes.
Press the alarm" button.
The warning signal switches off.
The alarm button remains lit until the set
freezer compartment temperature has
been reached.
If the door is open, the interior light in the
refrigerator compartment is lit up.
Note
If the light switch is pressed when the
door is open, Fig. 1/9, the interior light
goes out as well as the control panel
displays.
The factory has recommended the
following temperatures:
Refrigerator compartment
Freezer compartment
Operating tips
S The fully automatic No Frost system
keeps the freezer compartment and
refrigerator compartment free of ice.
Defrosting is not required.
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If you cannot open the freezer
compartment door immediately after
closing it, wait 2 3 minutes until the
partial vacuum has equalised.
Selecting the
temperature
Fig. 2
Refrigerator compartment
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated
on display 8.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
Freezer compartment
(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection
button 4 until the required freezer
compartment temperature is set.
+4 °C
The value last selected is stored.
-18 °C
The set temperature is indicated
on display 5.
We recommend a setting of -18 °C
in the freezer compartment.
en
29