Set The Initial Settings - Kenwood KMM-DAB403 Manual De Instrucciones

GETTING STARTED
5 Turn the volume knob to select [CLOCK FORMAT], then press the
knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the
knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then
press the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the
knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to select an item (see the following
table), then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH PREOUT REAR/SUB-W: Selects whether rear speakers or a subwoofer
are connected to the line out terminals on the rear (through an
external amplifier). ( 19)
SP SELECT OFF/5/4/6×9/6/OEM: Selects according to the speaker size
(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers
for optimum performance.
4 ENGLISH
TUNER SETTING
DAB L-BAND
DAB ANT POWER
PRESET TYPE
SYSTEM
KEY BEEP
SOURCE SELECT
.
BUILT-IN AUX
P-OFF WAIT
F/W UPDATE
UPDATE SYSTEM/UPDATE DAB1/UPDATE DAB2
F/W UP xxxx/
.
F/W UP xxxxx/
F/W UP Vxxx
Default: XX
CLOCK
CLOCK DISPLAY
ENGLISH
РУССКИЙ
ESPANOL
ON: Receives L-BAND ensemble during digital audio reception. ;
OFF: Cancels.
ON: Supplies power to the DAB antenna. Selects when using active antenna
with booster. ; OFF: Does not supply power. Selects when using passive
antenna without booster.
NORMAL: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/MW/LW/DB1/DB2/DB3). ; MIX: Memorizes one station (digital
radio or analog radio) for each preset button, regardless of the selected band.
ON: Activates the keypress tone. ; OFF: Deactivates.
ON: Enables AUX in source selection. ; OFF: Disables. ( 11)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; OFF – – –: Cancels
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see <www.kenwood.com/cs/ce/>.
ON: The clock time is shown on the display even when the unit is turned off. ;
OFF: Cancels.
Select the display language for [FUNCTION] menu and music information if
applicable.
By default, [ENGLISH] is selected