Intended Use; Technical Data; Functional Description; Commissioning - Festool CXS Manual De Instrucciones Original

English
The risk from these expo­
sures varies, depending on
how often you do this type of
work. To reduce your expo­
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

Cordless drill suitable
– for screwing in and tightening screws,
– for drilling in metal, wood, plastics and
similar materials.
Not intended for clamping tools other than
drills and drill bits, e.g. compass saws, stirring
rods, metal brushes.
Charger MXC suitable
– for charging the listed battery packs.
– only for indoor use.
The user is liable for improper or non-in­
tended use; this also includes continuous
industrial operation.
5

Technical data

Cordless drill
Motor voltage
No-load speed*
1st gear
2nd gear
Max. torque
soft/hard screwdriving appli­
cation
Adjustable torque
Chuck clamping range
Max. drill diameter
Wood/metal
Tool holder in drill spindle
10
Cordless drill
Weight (incl. battery pack and
chuck) as per EPTA proce­
dure 01:2014
Weight incl. battery pack and
Centrotec
* Speed values based on fully charged battery
pack.
6
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
[1-1]
[1-2]
[1-3]
[1-4]
[1-5]
[1-6]
[1-7]
[1-8]
CXS
[1-9]
10.8 V
[1-10] Bit store
[1-11] LED lamp with capacity indicator
0–430 rpm
7
0–1300 rpm
7.1
10/16 Nm
0.3–3.4 Nm
1/16" - 3/8"
Removing the battery pack
1–10 mm ► Press and hold the button [2-1].
► Slide the battery pack downwards to re­
1/2" / 5/16"
move.
12/8 mm
Inserting the battery pack
1/4"
► Slide the battery pack upwards into the ma­
chine like shown in [2] until it engages.
More technical data about the charg­
er and the supplied battery pack can
be found on page .

Functional description

Drilling symbol
Torque thumbwheel
Torque/drilling position marking
Gear switch
Right/left switch
On/Off switch
Belt clip
Insulated gripping surfaces (grey
shaded area)
Button for releasing the battery pack

Commissioning

Changing the battery pack [2]
Battery pack is ready for use immedi­
ately upon delivery and can be charg­
ed at any time.
CXS
2.4 lbs (1.1 kg)
2 lbs (0.9 kg)