Emission Levels; Technical Data; Intended Use - Festool C 18 Li Manual De Instrucciones

power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3

Emission levels

The levels determined in accordance with are
typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with :
Drilling in metal
Screwdriving
4

Technical data

Cordless drill
Motor voltage
No-load speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter
Tool holder in drill spindle
Weight excl. battery pack, incl. CENTROTEC
* Speed values based on fully charged battery
pack.
** The maximum speed (value for clockwise ro­
tation) is reduced in the lower torque settings.
L = 65 dB(A)
PA
L = 76 dB(A)
WA
K = 3 dB
(vector sum for
h
a = 3.5 m/s 2
h
K=1.5 m/s 2
< 2.5 m/s
a
2
h
K=1.5 m/s 2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
An increase is possible in other applications,
with other insertion tools or if the machine is
not maintained adequately. Take note of the
machine's idling and downtimes.
3

Intended use

Cordless drill suitable
– for drilling in metal, wood, plastics and
similar materials,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use; this also includes damage and wear
caused by continuous industrial operation.
1st gear
2nd gear
Soft material (wood)
Hard material (metal)
1st gear
2nd gear
Wood
Metal
English
C 18 Li
18 V
0–450 rpm
0–1500 rpm
27 Nm
45 Nm
0.8–8 Nm
0.5–6 Nm
1.5–13 mm
40 mm
13 mm
1/4"
1.0 kg
13