Tabla de contenido
Idiomas disponibles
Idiomas disponibles
23 When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual. Use
of unauthorised parts or failure to follow
Maintenance instructions may create a risk of
electric shock or injury.
Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known
(to the State of California) to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
Cordless drill/screwdriver
Motor voltage
Idle-running speed 1. speed
Max torque
Adjustable torque
Chuck capacity
Max. drill diameter for metal / wood
Tool fitting in chuck
Weight with battery pack
Charger
Supply voltage (input)
Line frequency
Charging voltage (output)
Charging current quick charge
Compensation charge pulsating app.
Charging time for NiCd 1.4 Ah
NiCd 1.7 Ah
NiCd 2.0 Ah
Battery pack
Order number
Voltage
Cells
Capacity
Temp. range for charging
Monitoring of charge
Weight
The illustrations mentioned can be found at the beginning of the operating instructions.
Symbols
V
volts
A
amperes
Hz
hertz
W
watt
~
alternating current
n
no load speed
0
Class II Construction
rpm
revolutions per minute
Technical data
2. speed
Soft boring (wood)
Hard boring (metal)
•lead from lead-based paints,
•crystalline silica from bricks and cement and
other masonry products, and
•arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these
chemicals: work in a well ventilated
area, and work with approved
safety equipment, such as dust
masks that are specially designed
to filter out microscopic particles.
CDD 9.6
9.6 V
0 – 380 rpm
0 - 1100 rpm
10 Nm
26 Nm
0.5 - 5 Nm
1 - 10 mm
12 mm / 20 mm
1/4"
1.8 kg (4.0 lbs)
MC 15
120 V ~
60 Hz
4.8 - 12 V (DC)
max. 7.5 A
0.03 A
app. 13 min
app. 15 min
app. 18 min
BPH 9.6 C
488 437
9.6 V
8 x 1.2 V, NiCd
2.0 Ah
5 - 45 °C
by means of NTC thermistor
0.5 kg (1.1 lbs)
Intended use
The cordless drill/screwdrivers are suitable for
drilling metal, wood, plastic and similar
materials, as well as for fastening and screwing
down of screws with a diameter up to 6 mm.
The chargers have been designed to charge
the battery packs specified under "Technical
data".
The user will be liable for damage
due to improper use.
5
CDD 12
12 V
0 - 380 rpm
0 - 1100 rpm
18 Nm
30 Nm
1 - 7 Nm
1.5 - 13 mm
14 mm / 25 mm
1/4"
2.0 kg (4.4 lbs)
BPH 12 C
488 438
12 V
10 x 1.2 V, NiCd
2.0 Ah
5 - 45 °C
0.6 kg (1.3 lbs)
Tabla de contenido
