SKYLOTEC DEUS 3300 Instrucciones De Uso página 9

Direction of rope travel
After threading rope through a SKYLOTEC DEUS
3000 Series controlled descent device, descent
can be done from either side of the rope because
all of the brakes in the device work equally in both
directions.
Descending
Always remove excess slack in the rope before
descending. For instructions on how to pull rope
through the device.
"Escape" rigging of a SKYLOTEC DEUS 3000
Series controlled descent device
"Escape" rigging means that the SKYLOTEC
DEUS 3000 Series controlled descent device is
set up for the user to escape or perform a self-
rescue from a situation at an elevated position.
It means the descent device is attached to the
harness of the person using it with a suitable
connector so that the user can control the descent
device while descending. When using "escape"
rigging, it is important to position the descent
device within easy reach of the person using it.
The illustrations at right show "escape" rigging
of a SKYLOTEC DEUS 3000 Series controlled
descent device.
"Escape" rigging using a carabiner as the connector.
"Escape" rigging using a sewn sling and carabiner as the
connectors.
"Escape" rigging with a carabiner and sewn sling that is too long,
putting the descent device out of reach of the user.
9