SKYLOTEC DEUS 3300 Instrucciones De Uso página 7

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 141
Controlled descent devices control the movement
of rope during descent or positioning. The
purpose of DEUS 3000 Series controlled descent
devices is to control the movement of rope either
automatically (hands free) or manually using
four independent brakes. The diagrams at left
show the various parts of a DEUS 3000 Series
controlled descent device.
Connectors – Connectors can be either hardware
like carabiners or software like webbing and rope.
The purpose of connectors is to link together the
various parts of the system. A vertical rescue
system typically requires at least two connectors:
one to connect the person to the system, and one
to connect the system to a suitable anchorage
point. Connectors must comply with EN 362, ANSI
Z359.12, CSA, and NFPA 1983:2012. Only use of
connectors with a self closing and locking gate are
permitted.
Harness – The harness is what connects you
to the vertical rescue system. The purpose of
the harness is to secure you to the system and
safely and comfortably distribute load during
descent. Your employer will determine which
harness is appropriate for your work. Harnesses
shall meet the requirements of the appropriate
safety standards for your location and industry
(e.g., NFPA 1983;2012, ANSI Z359.11, CSA or
EN 365; depending on application, location and
industry). Refer to the relevant standards for
details. The descent device, (using a carabiner)
must be connected to an approved attachment
point on the harness. For harnesses that are EN
361 certified, these approved attachment points
will be marked with an "A." Rescue Transfer Unit
– A rescue transfer unit is a specialized piece of
equipment used to raise a person who has fallen
and is suspended from a piece of fall-protection
equipment in order to transfer the load from the
fall-protection device to a rigged and anchored
controlled descent device. After the load is
transferred to the controlled descent, the unloaded
ROPE PART NUMBER
ATT-7.5T
A2W-7.5L
A2W-7.5B
A2W-8.0
CONSTRUCTION
TECHNORA/TECHNORA
POLYESTER/TECHNORA
POLYESTER/TECHNORA
POLYESTERTECHNORA/
TECHNORA
fall-protection device is released so that controlled
descent can proceed.
DEUS-approved ropes – DEUS 3000 Series
controlled descent devices are designed for use
ONLY with DEUS-approved ropes. Use of any
other ropes may result in injury or death. Refer to
the device's back plate for more information.
DEVICE
A-330
A2TT-7.5T-
A-370
A2W-8.0-
Anchor connector
Connector
Rope
Harness
DIAMETER
COLOR
7.5MM
7.5MM
GREEN
7.5MM
BLACK
8.0MM
ORANGE
ROPE PART NUMBER
, A2W-7.5B-
, A2W-7.5L-
xx
xx
xx
Anchorage
Connector
MANUFACTURER
TAN
PELICAN ROPE
PELICAN ROPE
PELICAN ROPE
PELICAN ROPE
xx
7
Tabla de contenido
loading

Productos relacionados para SKYLOTEC DEUS 3300

Este manual también es adecuado para:

Deus 3700

Tabla de contenido