SKYLOTEC DEUS 3300 Instrucciones De Uso página 27

max. no. of descents
(before inspection is required)
WEIGHT (kg)
59
100
140
SAMPLE
Serial: XXXXXX-XXX
The Model Number on your SKYLOTEC DEUS
3000 Series controlled descent device is located
on the hinged back panel; the Serial Number is
located just below the control dial on the frame.
It is preferable to issue a personal DEUS Rescue
3000 Series controlled descent device to each
person who may need one
EXAMPLE FOR ANSI CALCULATION
30
20
13
Serial number
HEIGHT (METERS)
91
7
4
9 3
Use
IMPORTANT: DEUS equipment must only be
used by persons trained in its proper use.
During training and practice with descent
devices, a back-up belay should always be used.
SKYLOTEC recommends the DEUS 7300 Back-
up Belay.
Verify that the DEUS Rescue equipment you are
using is compatible with the other components of
your rescue/safety system.
To prolong the life of DEUS equipment, care is
necessary when transporting as well as when
using it. If DEUS equipment is subjected to
extreme conditions during storage, transportation
or use, inspect it thoroughly. If you have
any doubts about the condition of the DEUS
equipment or the other components of the system
with which it is used, do not use the equipment.
Contact SKYLOTEC to return the equipment for
factory inspection and reconditioning.
152
4
2
2
27