Fitting The Harness; Starting / Stopping The Engine - Stihl FS 75 Manual De Instrucciones

English / USA

Fitting the Harness

2
Shoulder Strap*
:
Put on the shoulder strap (1).
:
With the brushcutter attached,
adjust length of strap until the spring
hook (2) is about a hand's width
below your right hip.
* see "Guide to Using this Manual"
20
Starting / Stopping
the Engine
1
2
Controls
Throttle trigger interlock (1)
Throttle trigger (2)
Slide control (3)
Positions of Slide Control
STOP-O (4) – engine off – the ignition is
switched off
# – normal run position (5) – the engine
is running or can start
START (6) - the ignition is switched on,
the engine can start
Symbol on slide control
7
h (7) – stop symbol and arrow – to stop
4
the engine, push the slide control in
direction of the arrow on the stop symbol
(h ) to STOP-O.
5
3
Starting
6
:
:
1
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
While holding both levers in this
position, move the slide control to
START and hold it there.
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
FS 75