Replacing The Starter Rope And Rewind Spring - Stihl FS 75 Manual De Instrucciones

To reduce the risk of fire and burn
injury, use only spark plugs
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug terminal (1) of the proper
size. (Note: If terminal has
detachable SAE adapter nut, it must
be attached.)
A loose connection between spark
plug boot and ignition wire
connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
FS 75
Replacing the Starter Rope
and Rewind Spring
1
Removing the Starter Cover
:
Take out the screws (1).
:
Lift the starter cover (2) away from
the tank (3) and pull it out from
under the shroud (4).
1
4
2
1 1
3
English / USA
5
Removing the Rope Rotor
:
Take out the screw (5).
:
Remove the rope rotor very
carefully.
The rewind spring is seated in the
rope rotor and may pop out and
uncoil if care is not taken.
The pieces of broken spring may be
under tension and fly apart
unexpectedly when you remove the
rope rotor. To help reduce the risk of
injury, wear face protection and
gloves.
27