Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English / USA
10
11
:
When the end of the drive tube is no
longer visible in the slot (11), push
the gearbox fully home as far as
stop.
:
Insert clamp screws as far as stop.
:
Line up the gearbox (10) on the
drive tube so that the machine
support on the powerhead points
down and the blades are horizontal.
:
Tighten down the clamp screws
firmly.
12
A
Adjust Handle Position on
Machines with Loop Handle:
:
Loosen screws on loop handle.
:
Line up the loop handle (4) and
move it to the most comfortable
position for the user and the
application.
Distance A must not be more than
21" (55 cm), about 14" (35 cm) is
recommended.
:
Tighten down screws on loop
handle firmly.
Fitting the Harness
4
Shoulder Strap
:
Put on the shoulder strap (1).
:
With the power scythe attached,
adjust length of strap until the spring
hook (3) is at the same height as
your right hip.
1
3
FH
Capítulos
Tabla de contenido
