Fitting The Carrying Eye; Mounting The Deflector; Mounting The Cutting Tools - Stihl FS 75 Manual De Instrucciones

Fitting the Carrying Eye*

1
1
2
: For position of carrying eye see
"Parts and Controls"
: Place the clamp (1) with the
tapped hole on the left-hand side
of the drive tube.
:
Squeeze the two ends of the clamp
together and hold in that position.
:
Insert M 6 x 14 screw (2).
:
Line up the carrying eye.
: Tighten down the screw firmly.
* see "Guide to Using this Manual"
FS 75

Mounting the Deflector

2
1
: Slip the clamp (1) over the
deflector (2).
: Push deflector with clamp onto the
bearing housing (3) as far as stop.
:
Tighten down the clamp.

Mounting the Cutting Tools

3
Preparations
:
Lay your trimmer on its back with
the shaft (2) facing up.
STIHL-"AutoCut 11-2"
: Take the thrust plate (1) off the
shaft (2).
STIHL-"PolyCut"
:
Fit the thrust plate (1) on the shaft
(2) so that internal hexagon (3)
engages hexagon (4).
English / USA
1
3
2
4
15