Fitting The Full Harness; Balancing The Trimmer/Brushcutter - Stihl FS 510 C-M Manual De Instrucciones

English
Opening the fuel filler cap
Turn the fuel filler cap
N
counterclockwise until it can be
removed from the tank opening.
Remove the fuel filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the screw cap
Position fuel filler cap.
N
Turn the fuel filler cap clockwise as
N
far as it will go and tighten it as
securely as possible by hand.
30

Fitting the Full Harness

Fitting the full harness is described in
detail in the instruction sheet supplied.
2
3
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Attach the spring hook to the
N
machine's perforated strip (3).
Find the right attachment point for the
cutting attachment you are using – see
"Balancing the Brushcutter".
Balancing the
Trimmer/Brushcutter
The machine will balance differently
depending on the cutting attachment
mounted.
Let the machine swing on the
N
harness until it stops moving –
1
change the connection point if
necessary
Hanging positions
Mowing heads, grass cutting blades and
brush knives should rest lightly on the
ground.
Circular saw blades should "hover"
approx. 8 in. (20 cm) above the ground.
FS 510 C-M, FS 560 C-M