Multi Language Display Setting; Adjusting The Illumination Color; Activating The Bt Audio Source; Entering Pin Code For Bluetooth Wireless Connection - Pioneer DEH-P65BT Manual De Instrucciones

Section
02 Operating this unit
2 Press MULTI-CONTROL to switch the tel-
ephone muting/attenuation.
Pressing MULTI-CONTROL will switch be-
tween ATT (attenuation) and MUTE (muting)
and that status will be displayed.

Multi language display setting

Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in either European language or Rus-
sian language.
! If embedded language and selected lan-
guage setting are not consistent with each
other, text information may not be dis-
played properly.
! Some characters may not be displayed
properly.
1 Use MULTI-CONTROL to select TITLE.
2 Press MULTI-CONTROL to select the lan-
guage.
EURO (European language)—RUSSIA (Rus-
sian language)

Adjusting the illumination color

Setting up of a color is performed by adjusting
the level of three colors such as red, green
and blue. The adjusted illumination color set-
ting is memorized as CUSTOM.
1 Use MULTI-CONTROL to select COLOR.
2 Push MULTI-CONTROL left or right to
select the color to adjust.
RED (red)—GREEN (green)—BLUE (blue)
3 Push MULTI-CONTROL up or down to
adjust the level of color.
4 to 0 is displayed as the level is increased or
decreased.
# CUSTOM setting is common for the display,
button and incoming calls illumination.
44
En

Activating the BT AUDIO source

You need to activate the BT AUDIO source in
order to use a Bluetooth audio player.
1 Use MULTI-CONTROL to select
BT AUDIO.
2 Press MULTI-CONTROL to turn the
BT AUDIO source on.
# To turn the BT AUDIO source off, press
MULTI-CONTROL again.
# If you turn the BT AUDIO in the initial settings
off, the history of the most recently connected
Bluetooth audio stored in this unit is cleared.
Entering PIN code for Bluetooth
wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter to this unit in ad-
vance PIN code of your Bluetooth audio
player, in order to set this unit ready for a
connection from your Bluetooth audio
player.
1 Use MULTI-CONTROL to select
PIN CODE INPUT.
2 Push MULTI-CONTROL up or down to
select a number.
3 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
4 After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL to store in this
unit.
# Pushing MULTI-CONTROL right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
# If an invalid character has been entered, sub-
sequent characters are not displayed.