Configuration
Warning
You can trigger a warning for the following error types:
HDD Full
HDD Error
Network Disconnected
IP Conflict
Illegal Login
Video input/output signals not equal
Exception Error
Parameter
Notifications
Audible Warning
The device emits a repeating tone.
Send E-mail
An e-mail is sent to a specific e-
mail address. See page 86
User
Warning
Note down the admin password.
The following password is preset
"1 2 3 4 5"
You can add new users, delete existing users and
change the settings in the "User Management" menu.
1.
To add a new user, select Add.
Parameter
Setting
User Name
Unique identification
Password
Access code for the device (device
management)
Note: Change all passwords on a regu-
lar basis, using a combination of letters
and numbers. Note down all pass-
words in a safe place.
Confirm
Enter the access code again here
Level
IMPORTANT:
More access rights can be set on the
Manager level than on the User level.
User's MAC
MAC address of the network adapter
Address
on the PC of the corresponding user
Note:
This limits access to the PC whose
MAC address is entered here!
2.
Enter the name and password and confirm the
password in the field below.
3.
Select the level and enter the MAC address.
4.
Confirm the settings by clicking Apply.
Warning
Pay attention to the instructions below on assign-
ing access rights.
88