Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 82

3 Press the 'record' soft button at the top of the LCD to start recording. The record icon
appears as a red circle. When recording, this icon becomes a red square.
Press the 'record' soft button to start recording your macro
While recording, a red border will appear around the LCD
4
Shift select 'color bars' on the program bus. The button will flash indicating it's a
shifted source.
5 Shift select 'color 1' on the preview bus. If you wish, you can map buttons such as
color bars, black and color generators to any of the main 10 buttons of the program and
preview bus for easier access. See the 'button mapping' section of this manual
for instructions.
6 Press the wipe button in transition control to ensure the macro records the wipe
transition selection.
7 In the 'wipe' LCD menu, set the rate to 2:00 seconds.
8 Press the 'auto' button in transition control to perform the wipe transition from color
bars to color 1.
9 Press the 'macro' button to return to the macro screen.
10 To set the macro to wait for 2 seconds before applying the next transition, press the
'add pause' soft button in the LCD menu and set the duration to 2 seconds by rotating
the 'seconds' knob. Press the 'confirm' soft button to record the pause.
11 Now shift select 'black' on the preview bus , press the 'mix' button in transition
control and press the 'auto' transition button. Your ATEM switcher will perform a mix
transition to black.
12 Press the Macro button to navigate back to the Macro menu, then press the 'record'
soft button to stop recording.
Using External ATEM Hardware Panels 82