Medion MD 37763 Manual De Instrucciones página 109

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
14
/
23
22
21
20
Fig. 2 – Control panel
14. Cleaning program operating light active (P1, P2 or P3)
15.
button, starts or interrupts the wash program
16.
button, glass cleaning program
17.
button, baby bottle cleaning program
18.
button, short program
19. Display field
20.
button, timer Delayed switch-on
/
21.
button, additional function:
extra dry
22. P button, program selection (P1, P2 or P3)
23.
button, switch the appliance on/off
26
25
Fig. 3 – Back of the appliance
24. Mains cable with mains plug
25. Connection for water supply
26. Connection for water outlet
6. Possible displays
Extra rinse active
Extra dry active
Warning light: too little special salt
Warning light: too little water
Operating time display
19
18
17
16
15
extra rinse
24
7. Installation
WARNING!
Risk of electric shock and material damage!
There is a risk of electric shock as well as material damage
if the appliance is connected improperly.
 The electricity and water supply should only be con-
nected by a qualified expert.
NOTICE!
Possible material damage!
There is a risk of material or water damage if the appliance
is installed or used incorrectly.
 Do not install the appliance in rooms prone to frost, as
considerable damage can result if the pipes burst.
 The appliance must be installed on a level, stable sur-
face, which can bear the weight of the appliance plus
that of the dishes contained in it.
 The appliance is designed as a free-standing appli-
ance. It must not be built into kitchen units.
 Use the appliance indoors only.
 Do not expose the appliance to extreme conditions.
Avoid:
– high humidity or wet conditions
– extremely high or low temperatures
– direct sunlight
– naked flames.
 Do not place the appliance near heat sources.
Chemical additives in furniture coatings may corrode the
material of the appliance feet and cause residue on the
furniture surface.
 If necessary, place the appliance on an underlay that is
insensitive to heat and moisture.
7.1. Set-up and levelling
 Install the appliance on a stable, flat surface close to a
drain and water connection:
– on a table/work surface
– in a ventilated cupboard.
 Observe the dimensions of the appliance when setting
it up:
Height
Width
Depth (door closed)
Depth (door open)
435 mm
420 mm
435 mm
750 mm
107
DE
FR
NL
ES
IT
EN
loading