Idiomas disponibles
Idiomas disponibles
EnGLIsh
DRILL/DRIVER/IMPACT DRILL
DCD1007
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
Speed 1 drill/hammer
Speed 2 drill/hammer
Speed 3 drill/hammer
Impact rate
Speed 1
Speed 2
Speed 3
Max. torque
Chuck capacity
Maximum drilling capacity
WOOD
Auger
Paddle
Twist
Self‑feed
Hole saw
SHEET METAL
Twist
Hole saw
Step bit
PLATE STEEL
Carbide tipped hole cutter
MASONRY
Carbide percussion bit
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given
sound level)
30
30
WALT one of the
e
DCD1007
V
18
DC
1
Li‑Ion
Drill, Driver/Impact drill
min‑1
0–450/0–500
min‑1
0–1200/0–1300
min‑1
0–2000/0–2250
min‑1
0–8500
min‑1
0–22100
min‑1
0–38250
Nm
169
mm
1.5–13
mm
38
mm
38
mm
25.4
mm
66
mm
127
mm
12.7
mm
101
mm
#9 (28.5)
mm
25.4
mm
12.7
kg
1.87
dB(A)
96
dB(A)
104
dB(A)
3
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Impact drilling
Vibration emission value a
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
Impact Drill
DCD1007
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN 62841‑1:2015+A11:2022 EN
62841‑2‑1:2018+A11:2019+A1:2022+A12:2022 .
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
WALT, Richard‑Klinger‑Straße 11,
e
DCD1007
=
m/s
2
< 2.5
m/s
2
1.5
=
m/s
2
12
m/s
2
1.5
WALT at
e
WALT.
e
