Idiomas disponibles
Idiomas disponibles
•
If the cooling device is le empty for long periods:
NOTICE! Damage hazard
•
Check that the voltage specification on the data plate corresponds to that of the energy
supply.
•
Only connect the cooling device as follows:
•
Never pull the plug out of the socket by the cable.
•
If the cooling device is connected to a DC outlet, disconnect the cooling device and other
power consuming devices from the battery before connecting a quick charging device.
•
If the cooling device is connected to a DC outlet, disconnect the cooling device or switch it
off when turning off the engine. Otherwise the battery may be discharged.
•
The cooling device is not suitable for transporting caustic materials or materials containing
solvents.
•
The insulation of the cooling device contains flammable cyclopentane and requires special
disposal procedures. Deliver the cooling device at the end of its life-cycle to an appropriate
recycling center.
•
Do not place the cooling device near open flames or other heat sources (heaters, direct sun-
light, gas ovens, etc.).
•
Risk of overheating! Ensure at all times that there is a minimum of 50 mm (1.97 in) venti-
lation on all sides of the cooling device. Keep the ventilation area free of any objects that
could obstruct the air flow to the cooling components. Do not use or store the cooling de-
vice in closed compartments or areas with none or minimal air flow.
•
Do not fill the inner container with ice or fluids.
•
Never immerse the cooling device in water.
•
Protect the cooling device and cables against heat and moisture.
•
The cooling device shall not to be exposed to rain.
4
Intended use
The cooling device is suitable for cooling food. The cooling device is also suitable for use on vehicles.
The cooling device is designed to be operated from a DC on-board power supply of a vehicle or boat, from a
DC auxiliary battery or from an AC power supply.
The cooling device is suitable for camping use.
The cooling device is intended to be used in applications such as:
•
Staff kitchen areas in shops, offices and other working environments
•
Farm houses
•
Clients in hotels, motels and other residential type environments
•
Bed and breakfast type environments
14
Switch off the cooling device.
Defrost the cooling device.
Clean and dry the cooling device.
Leave the lid open to prevent mold from developing within the cooling device.
With the DC connection cable to a DC power supply in the vehicle
With the AC connection cable to an AC power supply
