Idiomas disponibles
Idiomas disponibles
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop before opening the door to access the control
panel.
2. Press CANCEL/DRAIN.
The Cancel light glows.
3. Close the door. The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely. The light turns
off after 2 minutes.
To stop the drain
You can press CANCEL!DRAIN
again to stop the drain. Be sure
to drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL!DRAIN
before starting the dishwasher to clear all
options and cycles.
iiiiiii:ii::iii !!iiii illiii! ;
i !!iiii ill
Sii i!i! : ,i: i:iiii l
l!iiiiill
During the first minute of a cycle
1. Open the door. The Start/Resume
light begins flashing.
2. Press a new cycle and/or options.
3. Check the detergent dispensers. They must be filled properly
for the new cycle.
4. On top control models, press START/RESUME and firmly
close the door. On split control models, firmly close the door
and press START/RESUME.
After the first minute of a cycle
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop before opening the door to access the control
panel.
2. Press CANCEL!DRAIN.
The Cancel light glows.
3. Close the door. Your dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely. The light turns
off after 2 minutes.
NOTE: If your dishwasher does not need draining, the light
turns off.
4=
5.
6=
Open the door. Select a new cycle and/or options.
Check the detergent dispensers. They must be filled properly
for the new cycle.
On top control models, press START/RESUME and firmly
close the door. On split control models, firmly close the door
and press START/RESUME.
NOTE: On top control models, if the door is not closed within
3 seconds of pressing Start/Resume,
press START/RESUME
again.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop before opening the door. The Start light begins
flashing.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. On top control models, press START/RESUME and firmly
close the door. On split control models, firmly close the door
and press START/RESUME.
NOTE: On top control models, if the door is not closed within
3 seconds of pressing Start/Resume,
press START/RESUME
again.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
anytime before drying begins.
Press START/RESUME to use the same cycle and option(s) as
the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when
you press START/RESUME, the dishwasher runs the last full
wash cycle and options.
TURBOZONE
TM
wash option
Select this option to activate the TURBOZONE
TM
spray jets and
provide intensified water spray to the back of the lower dish rack.
The TURBOZONE
TM
wash option provides a concentrated
wash
action to pans, casseroles, etc. with tough food soil.
This option may add heat and wash time to the cycle.
NOTE: TURBOZONE
TM
is an option with the SMART WASH
TM,
Pots Pans, and Normal Wash cycles.
IMPORTANT:
Load pans, casserole dishes, etc. facing the TURBOZONE
TM
spray jets in the back of the lower dish rack. Tip items toward
the rear of the dish rack to maximize coverage. Only one row
of items may face the TURBOZONE
TM
spray jets. Stacking,
overlapping,
or nesting items will keep the TURBOZONE
TM
spray jets from reaching all of the surfaces.
•
To maximize spray coverage, avoid placing silverware basket
or other items to interfere with the rotation of the
TURBOZONE
TM
spray jets.
16
