Idiomas disponibles
Idiomas disponibles
4.By touching the temperature zone selection control, and then touch the
Timer control, the timer is canceled, and the "--" will be displayed on the
minute display.
5. Once the time has been set, the countdown
will start immediately. The display will show
the remaining time and the timer indicator will
flash for 5 seconds.
NOTE: The red dot next to the power level indicator will
illuminate indicating that the zone is selected.
6. The indicator will beep for 30 seconds and the timer
indicator will display "--" when the programmed time has
__
(9
elapsed.
Timer setting to turn off more than one cooking zone
cooking zone
1. If more than one heating zone uses this function, the timer indicator will show
the lowest time.
(e.g. zone2# set time of 3 minutes, zone 4# set time of 6 minutes, timer indicator
shows "3").
NOTE: The red dot next to the power level indicator will flash.
If you wish to check the programmed time of another cooking zone, touch
the cooking zone selection control. The timer will indicate the programmed
time. .
2. When the cooking timer expires, the corresponding cooking
zone will automatically turn off and display "H".
e
(±)
e oo (±)
30
==>
0
(adjusted to 6 minutes)
(adjusted to 3 minutes)
e 008:) ==> e--(±)==> e H (±)
68
e -- (±)
==>
0
177
U:l
