Gadnic ANAFE016 Manual De Usuario página 67

Anafe vitrocerámico
Idiomas disponibles

Idiomas disponibles

USE THE TIMER
• You can set the timer to turn off one or more cooking zones once the
programmed time has elapsed.
• You can set the timer for up to 99 minutes. If the set time exceeds 99
minutes, the timer will automatically return to 0 minutes.
Setting the timer to turn off a cooking zone
The cooking zones configured for this function:
1. Touching the selection button of the heating zone for which you want to set the
timer.
2. Touch the timer control , the indicator on the cooktop will start flashing and
"30" will be shown on the timer display.
3. Set the time by sliding to select the timer.
Note: Touch the timer control, the indicator will flash in the units position, then
press the timer again, the indicator will flash in the ten position, when you finish
these steps, the indicator will start flashing and the time will be shown on the
timer display. The first time you touch the timer control, the position of the unit
digits will flash. Adjust the time by sliding the timer control from left to right (or
right to left), you can adjust the position of the tens digits by increasing (or
decreasing) 1 minute.
3.2 Then touch the timer control again.
Adjust the time by sliding the timer control from left to right (or right to left), you
can adjust the position of one digit to increase (or decrease) 10 minutes.
O
5
30
,n
8
IU
67
loading