Idiomas disponibles
Idiomas disponibles
If the display flashes � ':' � in the heat setting zone
This means that:
• You have not placed a pan on the correct cooking zone or, the pan you are
using is not suitable for induction cooking or, the pan is too small or not
properly centered on the cooking zone.
No heating occurs unless there is a suitable pan on the cooking zone.
•
• The display will automatically switch off after 2 minutes if a suitable pan is
not placed.
4. Adjusting the power level
After selecting the cooking zone, the indicator next to the zone will flash "0",
slide the control from left to right to increase the power from 0-9 levels, from
right to left to decrease the power from 9-0.
BUTTON LOCK
You can lock the buttons to prevent them from being used accidentally
(e.g. children accidentally turning on the cooking zones).
When the buttons are locked, all buttons except ON/OFF and stop&go ,
are disabled.
To lock the buttons
Touch the unlock button @ The timer indicator
will display "Lo".
To unlock the buttons
1. Make sure that the ceramic hob is turned on.
2. Touch and hold the key lock knob. @ for 3-5 seconds.
3. You can now start using your ceramic glass cooktop.
Except for the ON/OFF buttons
can the plate with the button
but you must first unlock the board in the following operation.
----------
�
CD
65
CD
nd Stop&Go, you can always
a
ON/OFF in case of emergency
@
�
