Parkside PRM 1800 C3 Instrucciones De Utilización Y De Seguridad página 32

Cortacésped eléctrico
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 155
Introduction / Safety
CAUTION!
HEALTH RISKS THAT MAY
RESULT FROM VIBRATIONS ON THE ARMS
AND HANDS IF YOU USE THE DEVICE FOR
A LONG TIME OR IF IT IS NOT PROPERLY
USED OR MAINTAINED.
Vibration damping systems do not guarantee 100%
protection from Raynaud's phenomenon or carpal
tunnel syndrome. For this reason, keep a close eye on
the state of fingers and wrists when regularly using
the device for a prolonged period of time. Immedi­
ately seek medical attention when suffering from
symptoms of the aforementioned conditions. Keep
your hands warm while working and take regular
breaks to lower the risk of Raynaud's phenomenon.
● Safety
Damage due to failure to comply
with these operating instructions will
invalidate the guarantee! We
assume no liability for consequen­
tial damage! We assume no liability for
material damage or personal injury due to
improper handling or failure to comply
with the safety instructions!
Explanation of the signal
words
The following signal words are used in this
manual:
WARNING!
This signal symbol/word denotes a hazard
with an average risk level that could lead
32
GB/IE/NI/CY/MT
to death or severe injury if it is not
avoided.
CAUTION!
This signal symbol/word denotes a hazard
with a low risk level that could lead to mild
or moderate injury if it is not avoided.
NOTE!
This signal word provides a warning about
potential material damage.
General safety instruc­
tions
WARNING!
RISK OF ELECTRIC SHOCK!
Improper handling of the device,
incorrect electrical installation or
excessive mains voltage may lead to
an electric shock.
Only plug the device into a properly
installed outlet. The mains voltage must
correspond to the specification on the
type plate.
The device must be supplied via a
residual current protection device (RCD)
with a rated residual current of no more
than 30 mA.
Do not connect the device if there is
visible damage to the device, the power
cable or a power plug.
In case of a malfunction, immediately
disconnect the device from the power
cable or power supply.
Have a damaged device repaired by
the manufacturer, its customer service or
a qualified specialist only.
Do not open the housing and do not
introduce any objects into the housing.
loading

Este manual también es adecuado para:

436152 2304