Johnson JR8V Serie Manual De Instrucciones página 79

Sistema vrv unidade exterior
Idiomas disponibles

Idiomas disponibles

Center of gravity position is shown in Figure 2.2:
Table 2.1
Model
A
B
252-335
940
825
400-450
940
825
500-560
1340
825
615-670
1340
825
730
1880
825
785-900
1880
825
252-450
A
REAR
B
FRONT
CENTER OF
GRAVITY
C
500-900
A
REAR
B
C
CENTER OF
FRONT
NOTE
Use a leather belt that can adequately
support the weight of the unit, and has a
width ≤ 20 mm.
Images are for reference only. Please refer to
the actual product.
Do not remove any packaging while hoisting
the unit. Where the unit is not packed or the
package is damaged, use a gasket or
package to protect the unit.
The belt must have enough strength to bear
the weight of the unit; keep the machine
balanced and ensure the unit is lifted safely
and stably.
Forklift method
To move the unit with a forklift, insert the forks into
the opening at the bottom of the unit, as shown in
Figure 2.3.
For anti-corrosion models, put a pad on the forks to
prevent damage to the bottom frame paint of the
unit.
Unit: mm
C
D
504
453
466
507
610
492
651
448
885
441
825
456
D
D
GRAVITY
Figure 2.2
13
2.2 Unboxing the Outdoor Unit
Take the unit out of the packing materials:
Be careful not to damage the unit when you use a
cutting tool to remove the wrapping film.
Remove the four nuts on the wooden back stand.
WARNING
Plastic film should be disposed of properly. Keep
away from children. Potential risk: Asphyxia.
2.3 Taking Out Accessories of
the Outdoor Unit
The accessories for the unit are stored in two parts.
Documents like the manual are located at the top of
the unit. Accessories like the pipes are located inside
the unit. The unit contains the following accessories:
Table 2.2 Accessories
Name
Qty. Appearance
Owner's and
1
installation manual
Erp information
1
L-shaped pipe
2
connection
Build-out resistor
1
Wrench
1
1
Bluetooth Module
1
Magnetic ring
Figure 2.3
Function
To connect gas
and liquid pipes
To improve
communication
stability
To remove the
side plate
screws
Refer to attached
manual
Improve the
EMI effect of
communication
V.1
loading