Idiomas disponibles
Idiomas disponibles
Keep the blades clear of everything around, since they will start moving as
soon as the engine starts.
8.1.1
Cold starting
If the engine is cold or if it has been stopped for more than 5 minutes or if fuel has been added
to the engine.
b
a
a. Throttle lever
b. Engine switch
c. Stop
▪
Hold the unit down firmly so that you will not lose control while cranking the engine. If
not held down properly, the engine could make you lose your balance or swing the
cutting blade into a nearby object or your body.
▪
Pull out the starter handle slowly (10 to 15 cm), and check the pressure. Pull strongly
when you feel the pressure and start the engine.
▪
When the engine starts, return the choke lever to "
approximately one minute at a moderate speed before moving up to full speed.
Copyright © 2019 VARO
POWPG30110
c
▪
▪
▪
P a g e
The I-O switch is automatically in the "I"
position.
Push the primer pump gently (7 to 10 times)
until fuel begins to flow into it.
Move the choke lever (b) to position "
(open c)
". (close d) Run the engine for
| 7
EN
"
www.varo.com
