Functions Of The Caller Id System; Deleting Individual Or All Numbers Recorded; Using The Call Back Function - HumanTechnik scalla 2 Instrucciones De Servicio

Functions of the caller ID system

You must have caller ID activated by your
telephone provider before you can use this
feature.
Call display – The red light on the telephone
will flash to indicate that you have received
new calls. The light will continue to flash un-
til you have viewed all new calls.
Viewing recorded calls – Press "↑" or "↓" to
scroll between the entries in the caller list. If
a number has more than 13 digits, an arrow
will appear at the bottom right of the display.
Press "↑" or "↓" to see the remaining digits.
Storing recorded calls – Your telephone
will automatically store up to 50 calls. If the
memory is full, the oldest call will automati-
cally be deleted from the list. You can in-
crease the memory by deleting old calls.
Deleting individual or all numbers re-
corded
Delete an individual call:
1. Press "↑" or "↓" to select the entry that you
want to delete. The receiver has to be on
the hook.
2. Now press the
will appear in the display.
3. Press to confirm your selection.
Delete all calls recorded:
1. Press the
seconds. "Alle Löschen?" will appear in
the display.
2. To delete all entries, press the
ton again. "Keine Anrufe" will appear in
the display.
48 English
button. "Löschen?"
button for longer than 6

Using the call back function

Note: The call back function will not work if a
number is suppressed or not available.
A. Calling back a number already dialed:
The telephone stores the 15 numbers called
most frequently.
1. Press
hook. The last number called will appear
in the display.
2. Press "↑" or "↓" to scroll through the caller
list until you find the number you are
looking for.
3. Now pick up the receiver or press
dial the number.
B. Calling back a recorded number:
The telephone stores the call numbers of 50
incoming calls
Option 1:
1. Pick up the receiver or press
the dial tone.
2. Press "↑" or "↓" to scroll through the caller
list until you find the number you are
looking for.
3. Press "OK/MENU" to dial the desired
number.
Option 2:
1. With the receiver on the hook, press "↑"
or "↓" to page through the caller list until
you find the number you are looking for.
2. Now lift the receiver or press
the number.
but-
when the receiver is on the
/P
to
to get
to dial