If Your Telephone Doesn't Work; General Information; The Telephone Doesn't Work - HumanTechnik scalla 2 Instrucciones De Servicio

2. Screw in two screws (not included) one
directly above the other 8 cm apart at the
place you would like to mount the tele-
phone on the wall.
3. Now set the telephone base on the screws
and slide it down slightly to secure it in
place (see Fig. 3).
Fig. 3: Wall mounting for the telephone
1.
screw head
1.
50 English
2.
wall

If your telephone doesn't work...

General information

Make sure that the telephone cable isn't
damaged and is correctly inserted.
Disconnect any additional equipment, ex-
tension cables and other telephones.
If the telephone works then, this indicates
that the fault is caused by another piece of
equipment.
Try to connect your telephone to a neigh-
bour's line, for example. If it works there, this
indicates that there may be a fault on your
telephone line. Call the service provider to
report the fault.

The telephone doesn't work

• Make sure that the mains adapter is
correctly inserted into the telephone and
into the mains socket.
• Make sure that the telephone cable is
correctly inserted into the telephone and
into the telephone socket.
• Connect another telephone to your tele-
phone line. If it works, it indicates that
your telephone is probably faulty.
• Only use the original cable or a telephone
cable with an international configuration.