Idiomas disponibles
Idiomas disponibles
ENGLISH
Heating stops
suddenly during
operation and the
display shows a
flashing "u"
When trying to heat
areas of the same
size, like areas 1 and
2, the display shows
'u'
The fan motor
produces unusual
noises
Please note
-
These instructions are intended for qualified technicians, do not attempt to carry them
out if you do not have the necessary training and knowledge, as any damage caused by an
incorrect repair will void the warranty.
-
Do not try to disassemble the unit on your own to avoid hazards and damages to the
induction hob.
7. TECHNICAL SPECIFICATIONS
Product reference: 02764
Product: Bolero Squad I 3250 hob
Cooking areas: 3 areas
Supply voltage: 220-240 V~ 50/ 60 Hz
Installed electric power: 7400 W
Energy consumption of the EChob induction hob: 184,2 Wh/Kg
76
BOLERO SQUAD I 3250
The cookware is not
suitable.
The cookware diameter is
too small.
The hob has overheated.
The power board and the
board connected to the
display malfunction.
The display board of the
communication unit is
damaged.
The main board is
damaged.
The motor fan is
damaged.
Use a suitable cookware.
The unit has overheated.
Wait for the hob
temperature to return to
normal.
Press the Power button
to restart the product.
Check the connections.
Replace the display
board.
Replace the power
board.
Replace the fan.
The
cookware
detection
circuit is
damaged,
replace
the power
supply
board.
