cecotec BOLERO SQUAD I 3250 Manual De Instrucciones página 71

5. CLEANING AND MAINTENANCE
Dirt Cleaning icon
Usual dirt 1. Unplug the induction hob
on glass
(fingerprints, 2. Apply a worktop cleaner
marks, food
stains, etc.)
3. Rinse and dry with a clean
4. Reconnect the hob to the
Spills of sugar Remove them immediately with
and other hot a spatula or a suitable scraper
melted food on for induction hobs, but be careful
glass with the hot cooking zone:
1. Unplug the cooking hob from
2. Hold the cookware at a 30°
3. Clean the dirt or spill with a
4. Follow steps 2 to 4 from the
from the mains.
while the glass is still warm
(but not hot).
cloth or a paper towel.
mains if you wish to continue
using it.
the mains.
angle and scrape the dirt or
spillage onto a cool area of
the hob.
cloth or paper towel.
'Usual dirt on glass' section.
Important
If you unplug the induction hob
-
from the mains, the hot surface
indicator will disappear, but
the cooking zone will be hot. Be
especially careful.
Strong or some nylon scouring
-
pads and strong/abrasive
cleaning products can scratch the
glass. Always read the label to
check if your cleaning product or
scouring pad is suitable.
- Never leave any cleaning remains
on the induction hob: glass may
get stained.
- Remove melted and sugary
food stains or spills as soon as
possible. If left to cool on the
glass, they may be difficult to
remove or may even permanently
damage the glass surface.
- Cutting hazard: when the safety
cover is retracted, the blade of
the scraper may be sharp as a
razor. Use it with extreme care
and always store it safely and out
of reach of children.
BOLERO SQUAD I 3250
ENGLISH
71