Idiomas disponibles
Idiomas disponibles
7
****
9
10
Attaching the
torch body
Risk of damage to the welding torch.
▶
52
Screw the cap onto the inner liner as far as it will go. The inner liner must
be visible through the hole in the cap.
CAUTION!
Always tighten the union nut on the torch body as far as it will go.
8
NOTE!
Steel inner liners with an outer diame-
ter of less than 1 mm (0.039 in.) can-
not be screwed into the welding torch
- the specified tightening torque the-
refore does not apply to these liners.
All other inner liners must be screwed
into the welding torch and tightened to
the specified tightening torque.
