Fronius MHP 280i G PM Manual De Instrucciones página 43

Up/Down-func-
tion
JobMaster-func-
tion
Proper use The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in
manual applications.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
Carefully reading and following all the instructions given in the operating in-
structions
Performing all stipulated inspection and maintenance work.
The Up/Down torch has the following
functions:
- Changes the welding power in Syn-
ergic operation via the Up/Down
buttons
- Error display:
-
-
- Self-test during the run-up se-
quence:
-
The JobMaster welding torch has the
following functions:
- The desired welding parameter on
the power source can be selected
using the arrow buttons
- The selected welding parameter
can be changed using the +/- but-
tons
- The display shows the current wel-
ding parameter and value
English
all the LEDs light up red if the-
re is a system fault
all the LEDs flash red if there
is a data communication fault
all LEDs light up briefly one
after the other
43