Idiomas disponibles
Idiomas disponibles
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious injury and damage to property.
▶
Risk of burns from hot welding torch components and hot coolant.
This can result in scalding.
▶
Danger from operation of water-cooled welding torches without coolant.
This can result in damage to property.
▶
▶
▶
Risk of coolant escaping.
This can result in injury and damage to property.
▶
Risk of injury from moving parts.
This can result in injury and damage to property.
▶
46
WARNING!
All cables, lines and hosepacks must be properly connected, undamaged,
correctly insulated and adequately dimensioned at all times.
CAUTION!
Before commencing any of the work described in this document, allow all
welding torch components and the coolant to cool to room temperature
(+25°C, +77°F).
CAUTION!
Never operate a water-cooled welding torch without coolant.
During welding, ensure that the coolant is circulating correctly – this will be
the case if a regular return flow of coolant can be seen in the coolant contai-
ner of the cooling unit.
The manufacturer will not be liable for any damages due to non-observance
of the above mentioned points, and all claims against the warranty shall be
void.
CAUTION!
Seal the coolant hoses on water-cooled welding torches with the plastic
stoppers fitted to them if the hoses are detached from the cooling unit or
other system components.
CAUTION!
Close the cover over the feed rollers before using the welding torch.
