Fronius MHP 280i G PM Manual De Instrucciones página 47

Start-up
MTG d, MTW d -
1
Fitting wearing
parts to the
torch body
3
Note regarding
NOTE!
the inner liner
with gas-cooled If a plastic inner liner is used in the torch body of a gas-cooled welding torch,
welding torches reduce the power figure shown in the technical data by 30%.
▶
8 Nm
5.90 ft·lb
*
*
M6 ... 3 Nm / 2.21 ft·lb
M8 ... 1.5 - 5 Nm / 1.11 - 3.69 ft·lb
To operate gas-cooled welding torches at maximum power, use a steel inner
liner in the torch body.
2
**
English
Screw on and tighten the gas
nozzle as far as it will go
47