Parkside PWS 115 B2 Traduccion Del Manual De Instrucciones Originale página 27

Precaution symbol with information
on prevention of harm / damage.
Pull out the mains plug.
Connect the machine to the power
supply.
Notice symbol with information on
how to handle the device properly.
General Safety Directions
for Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compli-
ance with safety directions and inst-
ructions can cause electrical shock,
fi ­ re­and/or­severe­injuries.
Retain all safety directions and
instructions for future use.
The­term­„power­tool"­in­the­warnings­
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
Work area safety :
• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
Electrical safety :
• Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmo-
difi ­ ed­plugs­and­matching­outlets­will­
reduce risk of electric shock
• Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and ref-
rigerators.­There­is­an­increased­risk­
of electric shock if your body is earthed
or grounded.
• Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Ne-
ver use the cord for carrying,
pulling or unplugging the pow-
er tool. Keep cord away from
heat, oil, sharp edges or moving
parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
• If operation of the power tool in
a damp environment is unavoi-
dable, please use a residual cur-
rent circuitry. The­use­of­a­residual­
current circuitry reduces the risk of an
electric shock.
Personal safety:
• Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while
GB MT
27