Idiomas disponibles
Idiomas disponibles
GB
6. TROUBLESHOOTING
Faults
The engine does not
start.
The engine jerks.
No suction.
7. STORAGE
WARNING :
• To avoid fire risks, let the engine cool at least 30 min
before moving the pump or storing it.
• Before transporting the pump, switch the petrol
tank to OFF and place the motor-driven pump body
on a flat surface in order to avoid spilling petrol that
could catch fire.
If you have planned not to use the motor-driven
pump for a while (at least 15 days), consider
• Removing the spark plug, leave 3 or 4 cc of oil in
the spark plug compartment above the cylinder
and making two attempts to start the engine
without pushing it, so that the engine turns over a
few times, making it easier for the oil to circulate
through the cylinder and the pistons. This operation
prevents risks of rusting on cylinders, pistons and
valves.
• Empty the petrol tank.
1- Put the tap to OFF B.17 (FIG.B).
2- Unscrew the bleed screw on the carburettor tank
(container) B.16 (FIG.B).
3- The petrol will flow from inside the carburettor.
Collect it in a suitable container.
• Change the engine oil.
• Clean the air filter.
• Check that the screws are properly tightened and
retighten them as necessary.
• Clean the outer parts of the motor-driven pump to
remove dust and impurities. If necessary, use an
anti-rust spray.
• Cover the motor-driven pump with a nylon sheet
and store horizontally in a dry, well-ventilated place.
Possible cause
Lack of petrol.
Petrol supply valve closed.
Clogged carburettor.
Engine switch OFF.
Lack of oil.
Defective spark plugs.
Broken carburettor.
Choke is closed.
Insufficient quantity of water.
Strainer is obstructed.
Suction pipe not watertight.
Solutions
Open the valve.
Clean or replace.
Clean.
Switch to ON.
Add oil up to the max. level.
Clean or replace.
Replace.
Open.
Clean.
Clean the strainer.
Re-make the connections with Teflon.
• Clean carefully inside the motor-driven pump using
clean water, otherwise the rotor might be damaged
during future use. After cleaning, unscrew the drain
plug to let out all the water thereby preventing
damage caused by freezing in the storage location.
(Not covered by the warranty).
8. WARRANTY
WHAT IS MY PRODUCT WARRANTY?
The Customer benefits from an extension to the
legal warranty (compliance and hidden defects)
for the time shown on the packaging and/or on
the instructions. The original till receipt, invoice or
delivery note, in the event of distance selling, will be
required as proof of purchase.
W
Th
th
th
Th
• D
s
• A
r
u
c
• R
s
s
• U
p
• R
f
• T
n
c
• D
r
• D
d
fl
• A
n
In
wa
qu
ap
ou
th
In
th
co
HO
On
re
Cu
re
th
of
In
Co
co
th
re
se
wa
re
m
re
