Idiomas disponibles
Idiomas disponibles
. Getting started
Before using for the first time, ensure you read the
"Safety instructions" section.
.. Unpacking
• Select a suitable place for setting up the device
before unpacking.
• Open the box very carefully, to avoid damaging
the device. The device might get damaged if you
use a knife with a long blade to open the box.
• Completely remove the packaging material.
• The box contains a number of small items (includ-
ing batteries). Keep these out of the reach of chil-
dren, as they represent a choking hazard.
• Store the packaging material in a safe place. Only
use this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or
used improperly, creating a risk of suf-
focation!
Keep packaging material such as
plastic film or plastic bags away
from children.
.. Mounting
Attach the stand as shown in the illustration. Carry
out this step before connecting the LCD TV.
4 x ST4 x 12 (MD 30327)
4 x ST4 x 18 (MD 30328)
4 x ST4 x 14 (MD 30224)
4 x ST4 x 16 (MD 30225)
.. Inserting the batteries in
the remote control
Remove the battery compartment cover on the
back of the remote control.
Insert two LR03 (AAA) 1.5 V batteries in the battery
compartment of the remote control. Check the
battery polarity (see label on the bottom of the
battery compartment).
Close the battery compartment.
PLEASE NOTE!
Risk of damage!
The remote control can be damaged
by leaking batteries if not used for a
long period of time!
Remove the batteries from the re-
mote control if the device is not go-
ing to be used for a long period.
.. Connecting the antenna
Your LCD TV supports different antenna signals. You
can input the following image signals to the televi-
sion through the socket labelled
• Via analogue cable/an analogue house aerial
1
• Via a DVB-T/DVB-T2
antenna or
1
• Via a DVB-C
connection
Insert the antenna cable either from the house
aerial/analogue cable connection, a DVB-T anten-
na or the DVB-C connection in the antenna socket
on the LCD TV.
You also have the option of connecting a digital sat-
ellite system to the socket labelled
Screw a coaxial antenna cable's F connector onto
the connector on the LCD TV.
.. Connecting the power sup-
ply
Connect the mains plug on the device to an easily
accessible 100 - 240 V ~ 50 Hz mains socket.
This service must be available in your region
R F
:
L N B I N
.
9
DE
FR
IT
NL
EN
ES
