Idiomas disponibles
Idiomas disponibles
4. Remove the battery and store it separately in a
place protected from freezing and direct sunlight.
5. Clean and dry the motorcycle. Wax all painted
surfaces.
6. Inflate the tire to the appropriate tire pressure.
Place the motorcycle on the block so that both tires
are off the ground.
7. Cover the motorcycle (do not use plastic or
coating materials) and store it in a place without
heating,
moisture
and
change. Do not store the motorcycle in direct
sunlight.
End of storage for use
Remove the cover and wash the motorcycle. If it has
been stored for more than 4 months, change the oil.
Check the battery, charge if necessary, and then
install it in place.
Carry out all pre-trip inspections. Test drive the
motorcycle at a low speed in a safe area away from
the road.
minimum
temperature
50
Specification and Technical Parameter
QJ270MS-C, 4-stroke,
Engine
Displacement
Bore×Stroke
Maximum net power
Maximum torque
Drive system
Clutch
Ignition mode
ECU electronic control ignition
Starting mode
Oil reservoir
capacity
Curb weight
Length x width x
height (Excluding
rearview mirror)
Wheelbase
Tire
ABS
Brake mode
braking
Type of fuel
Lead-free clean gasoline
Maximum design
speed
liquid-cooled
3
554cm
70.5mm×71.0mm
41.2 kW / 8250 rpm
54.0N·m / 5500rpm
Chain drive
Wet multi-piece
Electric
16.5L±0.5 L
194kg
2106×776×1155mm
1420mm
Front: 120/70ZR17
Rear: 160/60ZR17
Front: Dish
Rear: Dish
180km/h
