Idiomas disponibles
Idiomas disponibles
vehicle and keep the rear wheel off the ground.
The damping force of shock absorber can be adjust-
ed by rotating the adjusting nut ① at the lower end
of the shock absorber: rotate the adjusting nut clock-
wise or counterclockwise with a slotted screwdriver,
and the damping force of the shock absorber will
also increase or decrease, so as to change the
rebound speed of the shock absorber. The damping
force adjusting nut will make a "click" sound every
time it is adjusted to one gear. It has been marked
when leaving the factory, and customers are
advised not to adjust it by themselves.
Warning
The preload of the rear shock absorber (the
degree of softness and hardness of the spring) has
been adjusted to the best riding condition in the
factory. Damping preload adjustment requires
expertise, if adjustment is required, please contact
The service station of the local QJMOTOR service
agency adjusts the shock absorber. Unauthorized
adjustment may cause safety accidents or
damage to parts due to uncoordinated adjustment.
Warning
When the adjuster is rotated to the limit position,
please do not continue to rotate in this direction,
otherwise the shock absorber will be damaged.
Instructions for use of fuel and engine
oil
Fuel oil
Please use unleaded gasoline. If the engine makes
a slight knocking sound, it may be using ordinary
grade fuel and should be replaced.
Notice
The use of unleaded gasoline can prolong the
service life of spark plugs.
Engine oil
Use a high purity, high performance synthetic engine
oil that meets the SN grade, factory recommended:
SN 15 W-50. [The loss of engine failure caused by
25
