Idiomas disponibles
Idiomas disponibles
direction and release to decelerate.
④ Front brake handle
When braking at the front, slowly tighten the brake
handle of the right handle.
⑤ Front brake handle adjuster
According to the requirements for operation comfort,
the front brake handle can be adjusted by adjusting
the knob position through the ring nut. The required
position can be adjusted by moving the front brake
handle horizontally forward slightly and then rotating
the ring nut adjuster to align with the arrow.
⑥ Ready switch
Left handle (option 2)
① Clutch handle
When starting the engine or
shifting gears, grip the clutch
handle to cut off the drive to the
rear wheel.
② Headlight high and low beam switch
When the light switch on the right handlebar is
turned to the " " position: when the headlight high
and low beam switch is pressed to the "
the headlight high beam is on, and the high beam
indicator on the instrument panel is also on; when
the switch is pressed to the "
light low beam is on. When you drive in the urban
area or there is another vehicle ahead, use the low
beam to avoid affecting the reciprocal line of sight.
③ Turn signal lamp switch
Press the turn signal lamp switch "" or " ", and
the left or right turn signal lamp flashes. At the same
time, the green steering indicator on the instrument
panel flashes accordingly. To deactivate the turn
signal, turn the turn signal switch to the middle or
press down the switch.
Warning
When changing lanes or turning, turn on your turn
signal lamp and make sure there is no vehicle
behind you. After changing lanes or turning, turn
off the turn signal lamp in time to avoid affecting
the normal running of other vehicles and avoid
accidents.
18
" position,
" position, the head-
