Idiomas disponibles
Idiomas disponibles
Left handle (option 1)
① Clutch handle
When starting the engine or
shifting gears, grip the clutch
handle to cut off the drive to
the rear wheel.
② Ready switch
③ Turn signal lamp switch
Press the turn signal lamp switch "" or "", and the
left or right turn signal lamp flashes. At the same
time, the green steering indicator on the instrument
panel flashes accordingly. To deactivate the turn
signal, turn the turn signal switch to the middle or
press down the switch.
Warning
When changing lanes or turning, turn on your turn
signal lamp and make sure there is no vehicle
behind you. After changing lanes or turning, turn
off the turn signal lamp in time to avoid affecting
the normal running of other vehicles and avoid
accidents.
④ Horn button
Press the horn button and the horn will sound.
⑤ Instrument adjustment button
See "Instrument Adjustment Key" on Page 13 above.
⑥ Headlamp high and low beam switch/overtaking
lamp switch
When the light switch on the right handlebar is
turned to the "
" position: when the headlight high
and low beam switch is pressed to the "
the headlight high beam is on, and the high beam
indicator on the instrument panel is also on; when
the switch is pressed to the "
light low beam is on. When you drive in the urban
area or there is another vehicle ahead, use the low
beam to avoid affecting the reciprocal line of sight.
When rendezvousing with other vehicle or overtak-
ing, press this button continuously, the headlight will
flash continuously to warn the vehicle ahead.
⑦ Clutch handle regulator
The position of the clutch lever can be adjusted by
adjusting the position of the knob via the ring nut as
required for operating comfort. Adjust one of the four
16
" position,
" position, the head-
