Idiomas disponibles
Idiomas disponibles
Installation
options
There are many different
installation options.
These are limited only by the design of the kitchen and
the function
of the finger guard.
Individual
unit
Side-by-Side
*
Partition required!
[_
When 2 appliances
are installed Side-by
Side,
the Basic
Combination
Side-by-Side
Sealing
kit
"BSEALKIT10"
must be used to ensure a stable
connection.
See the section on "Optional accessories"
on
page 11.
Individual
appliances
with partition
,
,
,
,
Note
When dimensioning
the partition for model 4, note
the thickness
of the furniture fronts to prevent
damage
if the doors are opened at the same time.
Use the Extreme
Combination
Side-by-Side
Heating
kit "XHEATKIT10"
a)
If the gap between the appliances
is tess than
6" (160 mm),
See the section on "Optional accessories"
on
page 11.
Minimum thickness
of the partition 5/s" (16 mm).
At the end of the kitchen units
If one side of the appliance
is visible, a side panel must
be used.
The side panel must be connected
firmly to the watt,
the floor and overhead
furniture/fixtures
before the
appliance
is placed in the cavity.
The dimensions
of the side panel are taken from the
opposite
cavity watt. During installation
ensure that the
cavity is square and the exact size.
5
