Idiomas disponibles
Idiomas disponibles
[3
Attach the bracket:
Lift the furniture door slightly away from the
appliance
door.
Push the side bracket on the left and right over
the screws Li_.
Insert the side bracket on the left and right into
the fixing plate and slide over the screw _.
Slowly lower the door.
Continue the process until the last side brackets
(_.)
have been inserted into the fixing plates and
are positioned
on the screws.
[_
The two upper brackets (_.
on the left and right)
have no side piece for insertion into the fixing plate.
C3 Close the door and check that the depth of the
furniture front is aligned with the adjacent fronts.
If required,
correct.
C3 Tighten the bracket screws to fix the depth
alignment.
C3 Close the door and check the side alignment.
Correct
by gently tapping
the edge of the open
furniture door with your hand.
[3
Tighten the nuts on the adjusting
rail. This wilt fix the
side alignment
of the door.
20. Attaching
the adjusting
rail
(freezer compartment)
[3
Measure the distance Y between the adjusting
rail
and the upper doors.
[3
Loosen the 2 nuts and remove the adjusting
rail.
25
