Idiomas disponibles
Idiomas disponibles
C3 Attach the base panel.
[_lf
required, the toe kick panel can be screwed to the
base panel. There are screw holes in the base panel
near the Vetcro.
15. Preparing
the furniture doors
When performing
any work on the furniture doors,
always observe the following:
Always screw into the best toad bearing material
of the furniture door.
Select a screw length which is always shorter than
the thickness
of the furniture front.
To prevent damage, protect
surfaces of the
furniture doors during installation.
The total weight of the furniture front must not
exceed the following
values:
BM 36" (top, 2 doors)
26 tbs / 12 kg (per door)
BM 36" (bottom)
22 tbs / 10 kg
The furniture fronts are attached
to the appliance
door
by means of fitting parts on the appliance.
These fitting
parts allow the furniture door to be adjusted
precisely
and attached
securely to the appliance.
Function
of different
parts:
1. Double threaded
bolt on the adjusting rail:
for vertical adjustment
of the furniture door.
2. Side brackets:
for adjusting the depth of the furniture front.
3. Nuts on the double threaded
bolt:
for securing the furniture front to prevent lateral
movement.
4. Lower brackets:
for securing the furniture front to prevent lateral
movement.
21
