Idiomas disponibles
Idiomas disponibles
Wood
floor application
Use the (5 x 60 mm) and (4 x 15 mm) wooden
screws
provided.
[3
Drill pilot holes:
1/s" (3 mm)for
the (5 x 60 mm) wooden
screws
5/64" (2 mm) for the (4 x 1 5 mm) wooden
screws
Being certain the screws penetrate through
the flooring and into the watt plate a minimum
of 3/4" (19 ram).
C3 Attach the anti tip bracket completely.
Be sure
screws hold tight.
[3
Clean hole or continue
drilling additional
depth.
a.
b.
c.
C3
Manually insert the screw into the walt plug until the
screw begins to resist.
C3
Knock the watt plug and screw into the hole until the
screw head is approx.
1/2"(13 mm) from the anti tip
bracket.
[_The
distance
D between the anti tip brackets
is
adequately
the width of the appliance.
Concrete
floor applications
Always wear safety glasses and other necessary
protective
devices or apparel when installing or
working with anchors
risk of injury!
Not recommended
for use in light weight masonry
material such as block or brick.
Not recommended
for use in new concrete
which has
not had time to cure.
Do not use core drills to drill holes for this anchor.
Use concrete
anchor M8 and M8 srew. Additional
use
the (5x60 mm) and (4x15 mm) wooden
screws
provided.
C3 Drill a 10 mm diameter hole any depth exceeding
the minimum
embedment.
Use the provided
drill.
[_The
distance
D between the anti tip brackets
is
adequately
the width of the appliance.
14
