Idiomas disponibles
Idiomas disponibles
Safe installation and use of your fall arrest device
EN
will be ensured by following the instructions
given in this manual. You should however refrain
from the following.
Do not:
– secure the fall arrest device by any means
other than that recommended in this manual,
– install or use the fall arrest device using a
damaged wire rope,
– use the fall arrest device on a lifting installation
for which the working load limit exceeds the
working load limit of the fall arrest device,
– use the fall arrest device without first having
completed the checks described in this
manual,
– use the fall arrest device for any operation
other than those for which it is intended, or
install the device in any way other than that
described in this manual,
– apply a load, other than the ballasting weight,
to the slack strand of the safety wire rope,
– use the fall arrest device in an explosive
environment (device not compliant with ATEX
directive 94/9/CE) or use the device in any
highly corrosive environment,
– use the fall arrest device at temperatures less
than -10°C or greater than +50°C,
– use any other means for operating the BSA fall
arrest device other than the lifting wire rope,
– use the fall arrest device to perform lifting
operations,
– use the fall arrest device if it has not been
inspected for more than 1 year,
– use the fall arrest device without first having
checked that all its safety equipment operates
correctly,
– use the fall arrest device with any wire rope
other than a genuine Tractel wire rope,
– actuate the lever on the BSA fall arrest device,
– modify the adjustment on the BSA fall arrest
device,
– make any changes to the fall arrest device,
– interfere in any way with movement of the
lever on the BSA fall arrest device,
– strike the control components on the fall arrest
device,
– use chemical products (acids, chlorinated
products) to clean the fall arrest device.
12
12. Warning
13. Markings
Each fall arrest device is engraved (fig. 3) with
the following information:
d: technical device reference
f: YY = last 2 digits of the manufacturing year,
MM = manufacturing month
g: device serial number
o: Made in France
0
Fig. 3
A label is fastened to each BSA (fig. 4) fall arrest
device; it contains the following information:
• item 1: designation,
• item 2: model,
• item 3: wire rope diameter in mm,
• item 4: "man lifting" symbol,
• item 5: working load limit for man lifting in
kg,
• item 6: symbol indicating obligation to read
this manual before installation and
use of the fall arrest device,
• item 7: manufacturer's address and contact
details.
Fig. 4
6
7
