Tractel Blocstop BSA Manual De Instalación, De Utilización Y De Mantenimiento página 10

Scope of check
EN
Fall arrest device
Wire ropes
Inclination limiting
function of fall arrest
device (BSA)
Detection function for
lifting wire rope rupture
or hoist failure (BSA)
Attachment system for
fall arrest device (BSA)
IMPORTANT: If a fall has been stopped, the
lifting system must be inspected by a technician.
10. Inspection and maintenance
The inspection and maintenance sheet is located
at the end of this manual.
10
9. Periodic maintenance and inspection
Frequency
Annual
Weekly
Daily
Daily
Daily
sheet
Person or service
Checks
in charge
Tractel or Functional check, cleaning,
approved repair lubrication.
agent
Technician As instructed in §5.2.2 of this
manual and recommendations in
lifting system manual.
Technician Check inclination stop: by
inclining the suspended platform
until the fall arrest device of the
lower hoist locks. Recover the
load on this hoist. Repeat the
check procedure for the other
device. This check must be
performed with the suspended
platform no more than 0.5 m off
the ground.
Technician Check locking of safety wire
rope: by placing suspended
platform on ground and checking
that the jaws in the fall arrest
device lock.
Technician - check for absence of
- check tightening of fall arrest
deformation on fall arrest
device connecting stirrup,
device mounting nuts.